> For the complete documentation index, see [llms.txt](https://support.sayprimer.com/primer/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://support.sayprimer.com/primer/audiences/match-rates.md).

# Match rates

What a match rate is, the match rates Primer typically achieves per destination, and how it differs from audience size.

The **match rate** is the share of your audience an ad platform can identify and target. Because no platform recognizes everyone, the audience that actually delivers is smaller than the one you built — the match rate is how much smaller.

## Match rate vs. audience size

These are two different numbers:

* **Audience size** is how many records match your filters (see [Audience size limits](https://support.sayprimer.com/primer/audiences/audience-size-limits.md)).
* **Match rate** is the percentage of that audience the destination can identify.

The **matched size** is roughly *audience size × match rate*. A large audience with a low match rate can deliver fewer people than a smaller audience with a high one, so check both when a destination reports a small matched size.

## Estimated match size before you sync

While you build an audience, Primer estimates a range for how many people Google Ads, Meta Ads and LinkedIn Ads are likely to match. See [Match size](https://support.sayprimer.com/primer/audiences/estimates.md#match-size).

## Actual matched size after you sync

Once a destination has matched the audience, Primer reads the actual matched size back from it and shows it as the audience's **Actual Size**. This works for every destination you can sync to — see [Connecting a destination](https://support.sayprimer.com/primer/connections/integrations/connecting-a-destination.md). Each version's matched size is kept in the audience's [history](https://support.sayprimer.com/primer/audiences/audience-history.md).

## Typical match rates by destination

These are the ranges Primer tends to achieve, with the typical rate advertisers see *without* Primer for contrast. Actual results vary by audience.

| Destination   | With Primer | Typical without Primer |
| ------------- | ----------- | ---------------------- |
| Meta          | 65–85%      | \~20%                  |
| LinkedIn      | 80–95%      | \~50%                  |
| Google Search | 35–45%      | 2%                     |
| Reddit        | 15–60%      | 2%                     |
| DV360         | 40–80%      | 2%                     |
| YouTube       | 20–45%      | 2%                     |

## Match rate vs. reach

**Match rate** is Primer's measure of how many of your records the platform *identified* — the matched count divided by the records Primer sent. **Reach** is the ad platform's own figure for how many of those matched people it can actually show ads to. It's computed on the platform's side, can be smaller than the matched count, and can lag while the platform builds the list — so a freshly synced audience may show a matched size in Primer before the platform shows a reach. See [Finding your synced audience](https://support.sayprimer.com/primer/audiences/finding-your-synced-audience.md).

A match rate is not a timing. For how long matching takes, see [How long matching takes](https://support.sayprimer.com/primer/audiences/match-timing.md).


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://support.sayprimer.com/primer/audiences/match-rates.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
